The paint roller is your best friend when it comes to painting the walls. Able to change color rapidly and uniformly, it takes a big thank you to our friend the roll. Available in different sizes and a variety of different materials, in general, if something should be deleted, regardless of whether we are able to do the job. In this article we will discuss some basic advice, do not read very often.
First, a brief explanation of the terminology. “Painting is Cage” is the tool that Shell roll real. The piece of tube color is applied, is called “manga” or “roll shell, etc. Sometimes, I describe the ‘role’ and ‘roll’ in the cage and the English Channel together.
Invite your role is an important step correctly, the amount of color you want as a role depends on the surface is painted and what kind of shell you are driving, but in general the proposal is the same. They want the rolls in the pan, until the roller just touches the sleeve of his painting, roll, let it saturate a moment, before lifting the paint roller, moving the tip pan and rotate the painting. To do this a few times you load the tray of paint and rollers, and the super-saturation of the rule, you want the paint roller on the point of saturation, because it allows a uniform thickness of paint and full coverage paint on the wall. It is also important to try to stifle, not all roles in color, must be in the hole to try to keep them there.
If you are a little “paint on the roller tray and load your game very simple and requires no time in the pan. A quick little color on the role of the pan, lift the rolling, which is usually two times and is ready to continue painting.
For the application of paint on the wall is the best method to use movements that extends from the top of the wall of the lower part of the work on the wall in 2 parts to 4 meters in width, depending on the height of wall and the capacity of roller sleeves. This extends the color and gives again the best investment.
Once you load your paint roller with paint, it’s time to start painting. If you use the scroll painting that you get enough pressure to the paint on the wall that apply in most cases, if you painted a very rough surface such as brick, it should not need too much force roll or press on the east wall is a work that probably more than necessary and leave the role of unsightly marks. Home about half of the wall, then roll the scroll on the wall above and then rolled on the floor of the new wall around the area where you started. You want something like a big patch go directly into the wall in his role with you in every direction, left or right, not too far from one part of your role you still live in the ancient kingdom paint that you want to advertise. On the way back to move in the direction of its rotation and begins to take shape of a V or W wide, make sure they extend to their homeland by the color returned to painting on the wall and give it a uniform thickness. The best results will be painted on the wall after the color of its distributed control of hills above the area that has been completed, the surface appears uniform.
The most common problems when the walls bearing on the application of paint, not to act under cover of uniform application of paint, processing and distribution of role conflict and brand names. Most of these problems can be corrected easily if, before the color has approved or dry weather, with paintings of today, only 5-10 minutes before a problem is preferable to verify the work a Once that’s it. When the paint is applied and / or are not uniformly distributed collection of color may begin to drip or sag, it is usually fairly obvious and easily corrected when quick way to find your equipment around. When the paint has been applied / Uniform can see what a holiday is generally well see an area once or twice and you do not fully cover the paint film. When the roller marks are present, it is usually a sign that too much pressure to apply the colors used to compress the natural role of the edges of the roller shell. Most of these problems can easily face against the wall of an acute angle on the ground. In general, these problems tend to be one of the following: roller sleeve of poor quality, poor ride quality due to poor quality / old paint roller is loaded tray with little or wrong and simply a painter on the experience.
