We use electricity for everything in the house. Nowadays many people can not live without electricity. It is therefore worth a little “about it, how to identify electrical problems.
When the electricity in your house, not in parts or in the work of a whole, can the power outage caused by various problems. The first figure what to do, to what extent the interruption. If you see sparks off, the smell of smoke (especially if the smell of rubber) or evidence of a short circuit, such as blackheads and isolation area, the unit, disconnect the electricity part of his house and call an electrician. Do not try to do your electrical repairs, if you will, has achieved this goal and have knowledge of electrical work.
Here are some common electrical problems that may occur at home:
Operation of the network, the device does not work – There are three possible causes of this and we can easily verify. Firstly, the camera is turned on? There are many cases that the user simply forgets to change something. Secondly, the device can not work. Tip insertion: a takeover that has been given. If the device does not work, then you do something wrong. If in this second exit, then the problem is the third option, the first outlet, May be defective or not in the socket.
No electricity in parts or whole house – it can not be immediately apparent. To determine if this is the case, try other household appliances such as lights. Be sure to see the investigation in the house at the point of interruption. If you find that the parties are interested, check the switch. Some switches are activated to do with lights or signs which gave easier for you. If you have not checked, can be overloaded. In this case, activate the switch and ask for help.
If the failure is around the house, call your neighbors and ask if they have no power. In these cases it may be given a power outage or if your provider may have had some problems in the electricity grid to which. It is advised to call the power company and let them solve the problem.
Automatic shutdown when connected and try to install a new device – This is a classic example of overloading. To disconnect the device, if this happens again. If violence is not activated again, the circuit is encountered, it is best to check the box on the runway. Disable some of the electricity of the house and then ask for help.
In general, if there is a problem, look at next. Do not go blindly and take what others have said, or the language used to describe the situation. Some problems occur only once, then disappeared. Some things you might think, actually died, still working. At the end of the day, electricity is not something that can be solved without adequate training, so you better know someone to touch, like a professional.
The first step in solving any electrical problems is to find the real problem. If people in a room does not work, the problem may be the point of sale or prior to the course. If one LED does not work, can be as simple as the bulb is burned, or change a bad light socket or bad, or maybe even a neutral conductor of heat or an electrical outlet that powers the circuit as. The hardest thing is always to find the problem, repair is usually benign.
Finding electrical problems will be much easier with a multimeter. For a rookie, even for experts, the circuit must be disabled on the control panel before working on them, unless of course you can live in a place with a multimeter to check. A video on how to easily use a multimeter can be accessed on its website a few favorite videos such as YouTube.
With a small base “of several meters of know-how and a little patience, you can most electrical problems within a relatively short to be found. In the light once they are excluded, the onion, place the switch is ideal to start. The switches are mechanical devices that are activated and again and again. break or wear out too regularly. Firstly, with the power and even stopped to see if one of the two terminals on can see, live, or hot. Then turn the ignition key and see if the life of the phone. If not, then change is bad and must be replaced. Do not forget to turn off the power to the correct way forward.
Outlets are connected in series, it feeds the next and the next and so on. If a hot wire or neutral has been removed or burned an outlet, the other outlets on the circuit does not work. Points of cable pulling is the main reason of this problem and overload (eg too many things at once in the same outlet or the same street.) If you overload the circuits you want to take a new path in this area so that the burden can be shared between the two circuits must be sought.
The cables are burnt or loose connections caused by overloading the circuit … Sometimes I saw a lightning caused, but usually right on the window of a meter. Fasten cables burning, make sure first that the circuit is off, then cut the cable burnt, stripping it back and find the same place. If the wire is burned in an electrical outlet or switch, replacing the position is much cheaper than a possible fire in the house, is not it? The electrical system is not a place to cut corners.
